Electric Impact Wrench,Car Jack (XB-H340)

Car Jack (WH-002)
Operation:
1)Turn on the power of the car. If the voltage of the battery is too low, please start the engine.
2)plug into cigarette lighter or connect with the car's battery.
3)Choose the proper socket to the wrench's shaft.
4)According to working rotation, choose the switch for loosening or tightening (Do the reverse for L. H. Screw)
A. Press left side of the switch (with mark II)to start opreation, and each nut will be loosen after two or three times of "clatter" sound.
B. Press right side of switch (with mark I) to tighten nuts, it will be tight enough after two or three times of "clatter"sound.

Caution:
A. This tool can only be applied to DC 12V power of car.
B. Do not use the tool continuosly more that 10 minutes.
C. Do not touch the shaft head with hand during operation.
D. When using the clips to car's battery, please make sure to apply the right positive and negative terminals.
E. Do not use sockets not included in this kit.
F. New fuse's rated current should be or less than 12A.
G. Turn off the switch 3-5 seconds after the "clatter"sound is heard, then continue the opreation.
H. The manufacturer recommends checking the tightness of the wheel nuts with s wheel brace after tightening with the impact wrench. The impact wrench is only for emergency use. Use a professional torque wrench to recheck the correct torque as soon as possible.
L. The manufacturee takes no responsibility for incorrect usage of this product and the impact wrench POB-ST-22 are only designed to loosen and tighten car wheel nuts'

ACCESSORY: SPECIFICATIONS:
A)Clips to car battery A. Voltage: DC 12V
B)Sockets of 4 sizes B. Input power: 100W
C)A rod C. Max. Torque: 340N. M
D)Weight: 3.0kg(with case)